What is an electric tricycle transmission?
The transmission is a mechanism used to change the speed and torque of the engine.
It can change the transmission ratio of the output shaft and the input shaft in a fixed or divided gear, also known as a gearbox.
The transmission consists of a variable speed transmission mechanism and a control mechanism, and some cars also have a power output mechanism.
Ordinary gears drive most transmission mechanisms, and planetary gears cause some.
Regular gear transmission mechanisms generally use slip gears and synchronizers.
What are the standard terms for electric tricycle transmission?
Driving gear, driven gear.
The input shaft can be understood as being connected to the clutch and rotated under the engine’s drive, and the gear fixed on the input shaft rotates synchronously.
This gear is called a driven gear.
Transmission ratio i.
The ratio of the number of teeth of the driving gear to the number of teeth is defined as the transmission ratio.
When the relationship between the number of teeth of the driven gear and the number of teeth of the driving gear changes, the transmission ratio changes.
Under the condition that the engine speed remains unchanged, it will affect the transformation of the output shaft speed; that is, the wheel speed changes.
For a pair of intermeshing gears, the number of teeth will not change during use, so its transmission ratio is fixed if several packs with different numbers of teeth are installed on the input shaft to mesh with the corresponding gears on the output shaft with varying numbers of teeth, a set of stepped transmissions with different transmission ratios I can be obtained. The automobile transmission is based on this basic principle to realize gear shifting.
Forward gear, a gear that enables the car to drive forward. Reverse gear is a gear that enables the car to travel in reverse. In neutral gear, all bags in the transmission are not in the working position. After the engine power is input to the input shaft, it is no longer transmitted to the output shaft.
Direct file. The engine’s power is not transmitted through any gears in the transmission but is directly output through the transmission input shaft, and the output shaft is directly connected to it as a direct gear. The direct gear ratio is 1.
Overdrive. That is, the speed of the output shaft is higher than the speed of the input shaft.
Number of files. Refers to the number of gears a stepped gear transmission has. Commonly used gear transmissions have four to five bags, and three-speed messages are rare. The more gears, the better the adaptability of the car to the driving conditions and the lower the fuel consumption, but the more complicated the transmission mechanism and the control mechanism, the more complex the operation and the higher the cost.
Low-grade, high-grade. Among the transmission’s gears, the gear with a smaller number is called a low gear. The smaller the gear, the larger the transmission ratio, the greater the traction, and the lower the vehicle speed. For example, the transmission ratio of the first gear is the largest in the forward pack, the vehicle speed is the lowest, and the traction force is the largest. The bag with the more significant number is called high-grade; the larger the number, the smaller the transmission ratio and the smaller the traction force, but the higher the speed.
Shift. The process of changing the gear ratio of the transmission is called shifting. Engagement sleeve shifting, shifting is integrated with the gear, and the engagement ring gear located on the tooth side meshes (or separates) with the engagement sleeve to realize the transmission ratio change, which is called engagement sleeve shifting. Synchronizer shift, use the synchronizer to shift. Shifting is not only free of shock and noise on the engagement teeth but also has short shift times.
Skip gear. Due to the wear and vibration of the engagement teeth during the car’s driving, the engagement sleeve and the engagement ring gear are separated, and the transmission is in a neutral state.
Conclusion
The electric tricycle is a kind of transportation composed of various parts, and there are multiple types and names of transmissions. More details are welcome to subscribe.
